Resolved! WS-C3560E-24PD-E version
What is the MD version of WS-C3560E-24PD-E? c3560e-universalk9-mz.152-4.E10.binTried upgrading to this ios but it just keeps rebooting. In the end, I restored it to the original os with rommon.
What is the MD version of WS-C3560E-24PD-E? c3560e-universalk9-mz.152-4.E10.binTried upgrading to this ios but it just keeps rebooting. In the end, I restored it to the original os with rommon.
I have a Cisco Telepresence MX700 installed on one of our conference room but have a lot of clients use other webinar platforms to have a video conference meeting. I can only utilize webex on the Cisco Telepresence I would like to allow Zoom as well ...
Hello, Has anyone updated to Patch 9 of ISE version 2.7 and seen a resurgence of the bug described here?https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwa60903 We are weary since it had affected us before Patch 8. The bug search shows that the Known...
Hi,what is the SNMP OID to see the jumbo frame information that I can see on the CLI?show interface eth1/2 counters detailed snmpEthernet1/2...Tx Jumbo Packets: 12944537...Tx Packets from 1519 to 1548 bytes: 12944537Thank you
I've registered for Netacad and downloaded packet tracer. I'm on Mac Big Sur 11.1. Packet tracer 7 doesn't seem to allow me to sign into my netacad acount. I've tried this on/off VPN and firewall on/off. Clicking "USER LOGIN" does nothing. Any advice...
When I try to log in to Packet Tracer, it says "Please use netacad.cn to access the Cisco Networking Academy program", how do I fix it? I'm from China.
Hi everybody,I use the "Cicso AnyConnect Secure Mobility Client" (version 4.10.01075) for access to my company's network. It usually works fine, once I'm past the login, but there is exactly the "problem" (well, actuall more an annoyance...). When I ...
Hello, I am receiving an “out of service” error message practically every time I call this one, in-service phone number. Rarely my Cisco UC integration lync phone is able to connect to the number. How can I ensure that my call goes through to this n...
Hi, I have a Cisco Firepower 2110 running version 9.14.(2) 13 and Device Manager Version 7.14 (1)Recently I have had a spontaneous reboot during the middle of the night, nothing suggested why the Firepower rebooted. I thought the above version fixed ...
Hi all,When executing the network discovery for the network inventory/devices within the solarwinds, it is listing a number of IP addresses and its hostnames etc....Each cisco devices has L3 interfaces including L3 logical/vlan with its Ip addresses....
I have upgrade several Cisco 2960s in the same branch office using the same TFTP server and image, however one is not working. Im going from 15.2(7)E3 to 15.2.7E(7) MD. Below is the output I get. The TFTP server is reachable and I was able to do 4 ot...
Hey there, I have a vm running a cisco ucs central appliance in version 2.0(1p).The vm resources are: 12vCpu, 32GB of ram and more than enough disk space...For some reason my memory usage is extremely high and keeps going up all the time...I have 115...
Operating Systems: Windows 11, Windows 10 Software Version: Cisco Packet Tracer 8.2 Question: Login through "Skills For All" button, it doesn't respond. After opening the login window through the Networking Academy button, it appears as follows and I...
I am trying to upgrade from VMware ESXi 6.5 U2 to the most current ESXi build possible for our server. Beforehand, I would like to check for any firmware updates that are available.Could someone help me find out what firmware updates I need for a res...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-24-2024 03:07 AM | ||
04-23-2024 07:33 PM | ||
04-23-2024 01:31 PM | ||
04-23-2024 01:00 PM | ||
04-23-2024 12:18 PM |
User | Count |
---|---|
3 | |
1 | |
1 | |
1 | |
1 |