03-01-2023 10:17 PM
Hi Everyone, We are encountering an issue where the 'sh history all' is filled up by the prime logs. I can see prime is logs onto the switch and running some commands and it no commands run once prime user logs out.
Prime Version : 3.9
We need to get rid of it as we are not using prime for the monitoring of Cisco switches but just for backup of the configs.
Is there anyway to turn this off except the config backups.
Please help!!
CMD: 'show etherchannel detail' 13:19:18 EST Thu Mar 2 2023
CMD: 'dir' 13:19:18 EST Thu Mar 2 2023
Mar 2 13:19:33.583 EST: %IOSXE_INFRA-6-PROCPATH_CLIENT_HOG: IOS shim client 'chasfs' has taken 504 msec (runtime: 5
CMD: 'show idprom all' 13:21:08 EST Thu Mar 2 2023
CMD: 'show fex' 13:21:08 EST Thu Mar 2 2023
CMD: 'disable' 13:21:09 EST Thu Mar 2 2023
Mar 2 13:21:09.306 EST: %SYS-6-LOGOUT: User primeconfigbackup has exited tty session 2(172.22.2.199)
Mar 2 13:21:09.420 EST: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: primeconfigbackup] [Source: 172.22.2.199]
CMD: 'enable' 13:21:09 EST Thu Mar 2 2023
CMD: 'terminal length 0' 13:21:09 EST Thu Mar 2 2023
CMD: 'terminal width 0' 13:21:09 EST Thu Mar 2 2023
CMD: 'show template' 13:21:09 EST Thu Mar 2 2023
CMD: 'show template interface source built-in AP_INTERFACE_TEMPLATE' 13:21:09 EST Thu Mar 2 2023
CMD: 'show template interface binding AP_INTERFACE_TEMPLATE' 13:21:09 EST Thu Mar 2 2023
CMD: 'show template interface source built-in DMP_INTERFACE_TEMPLATE' 13:21:09 EST Thu Mar 2 2023
CMD: 'show template interface binding DMP_INTERFACE_TEMPLATE' 13:21:09 EST Thu Mar 2 2023
CMD: 'show template interface source built-in IP_CAMERA_INTERFACE_TEMPLATE' 13:21:09 EST Thu Mar 2 2023
CMD: 'show template interface binding IP_CAMERA_INTERFACE_TEMPLATE' 13:21:09 EST Thu Mar 2 2023
CMD: 'show template interface source built-in IP_PHONE_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface binding IP_PHONE_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface source built-in LAP_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface binding LAP_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface source built-in MSP_CAMERA_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface binding MSP_CAMERA_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface source built-in MSP_VC_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface binding MSP_VC_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface source built-in PRINTER_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface binding PRINTER_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface source built-in ROUTER_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface binding ROUTER_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface source built-in SWITCH_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface binding SWITCH_INTERFACE_TEMPLATE' 13:21:10 EST Thu Mar 2 2023
CMD: 'show template interface source built-in TP_INTERFACE_TEMPLATE' 13:21:11 EST Thu Mar 2 2023
CMD: 'show template interface binding TP_INTERFACE_TEMPLATE' 13:21:11 EST Thu Mar 2 2023
CMD: 'show parameter-map type subscriber attribute-to-service name BUILTIN_DEVICE_TO_TEMPLATE' 13:21:11 EST Thu Mar
CMD: 'show archive log config all' 13:21:11 EST Thu Mar 2 2023
CMD: 'show ip nbar att' 13:21:11 EST Thu Mar 2 2023
CMD: 'show archive log config all | exclude \|!' 13:21:11 EST Thu Mar 2 2023
CMD: 'show ip sla application' 13:21:11 EST Thu Mar 2 2023
CMD: 'disable' 13:23:11 EST Thu Mar 2 2023
Mar 2 13:23:11.664 EST: %SYS-6-LOGOUT: User primeconfigbackup has exited tty session 3(172.22.2.199)
03-01-2023 11:19 PM
check the config and remove TEMPLATES you do not need it.
03-02-2023 03:24 PM
I have checked and removed the templates but no luck.. how do I find out what template or what's causing it??
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide