09-15-2016 01:00 PM - edited 03-01-2019 04:31 AM
Hello folks,
For wan connection with sub-rate ethernet, where/how do I set the shaping function, e.g parent shaper of 50M, and child policy of APIC-EM generated one?
Per video Cisco APIC-EM EasyQoS Demo on Vimeo
it was mentioned a wan interface needs to be marked, but where/how?
I am running 1.2.1.
Thanks in advance,
Quentin
Solved! Go to Solution.
09-15-2016 01:42 PM
That comes from meta data in the description on the interface.
#WAN#20M#SPP4# would indicate the wan link is 50m and uses SP Profile #4 (8 class).
This also defines the SP Profile which is the mapping of the internal 12 class model into the SP model (in this case 8 class).
you can have 4/5/6/8 class maps.
1.3 will allow you to define your own SP maps.
09-15-2016 01:42 PM
That comes from meta data in the description on the interface.
#WAN#20M#SPP4# would indicate the wan link is 50m and uses SP Profile #4 (8 class).
This also defines the SP Profile which is the mapping of the internal 12 class model into the SP model (in this case 8 class).
you can have 4/5/6/8 class maps.
1.3 will allow you to define your own SP maps.
09-15-2016 02:44 PM
Great, that seems to work. Is this documented anywhere?
And is there a way to change the bandwidth percentage for each queue? The generated policy looks to have fixed percentage for each queue. How about buffer adjustment? If that is not too much to ask;-)
Thanks again,
Quentin
09-17-2016 05:30 PM
A custom profile will allow you to change the allocation of BW percentages.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide