Controllers

I have configured APIC-EM in stand alone mode and have discovered a majority of my network devices. On many of these devices, I am unable to view host information within the APIC console. Port information is gathered successfully. I have verified tha...

Hello,   I'm new to the world of coding but have an extensive background with Cisco.  I've recently installed APIC-EM to see what it can do.  I found the 'get-network-device-list.py' in the learning labs to be very practical.  I tweaked the device_li...

Hello. I want to integrate my lab CUCM to the APIC-EM sandbox in order to play with deploying Easy QOS for Jabber.I just reserved a lab for the first time, but am not sure how to accomplish adding a CUCM on the corporate network into the topology.Any...

Is there anyone that can assist with deploying APIC-EM with IWAN and EasyQOS? Two sites with 3 ASR1001 routers on each end (MPLS,P2P,INET).

Is there a repository of examples that we can leverage to help us write python scripts? I tried the ACI Toolkit but found it didn't have some features I needed so I went back to the cobra SDK. I also converted XML scripts from Cisco documentation usi...

Get all subnets from APIC-EM controller

Hello,with APIC-EM Ca2 release the PnP functionality works pretts well with Prime Infrastructure 3 (Patch PI 3.0.3 installed)It brings the following error:Error in create Or Update pre-provisioning DetailsOn the other side I see that the configuratio...

Hello,for testing APIC-EM I discovered a location with 7 * 2960X Switches + 3750X core.It seems that the Host information on the discovered switches is wrong. For example: APIC-EM show that 4 Hosts are connected to a switch but 24 ports are up includ...

Hi,  As shown in aci_demo_contract.py, I was able to create a new contract and setup several filters as well. When I try to remove a contract or filter, using mark_as_deleted() and pushing to APIC, everything work as usual but in the Secutity Policie...

I am trying to install APIC-EM ISO into my VM VirtualBox, and it boots and gets to grapevine prompt.i don't know how to login/pass and what to do to get to APIC-EM wizard.