07-19-2017 03:17 PM - edited 03-01-2019 04:39 AM
I have a WS-C3750x-24s running the image c3750e-universalk9-mz.152-3.E3. I am using APIC-EM PnP v1.3.3.126 to upgrade the IOS and push the config to it. But the image upgrade takes over 40 minutes to complete and resulting in error "Failed health check since device is stuck in non-terminal state PROVISIONING_IMAGE for more than threshold time: 0 hours, 40 minutes, 0 seconds"
There appears to be a known issue about this. https://quickview.cloudapps.cisco.com/quickview/bug/CSCuy57714
Is there a way to increase or adjust the time threshold so it does not generate this error?
Thanks in advance
Solved! Go to Solution.
07-19-2017 03:25 PM
Sure is.
PnP->Settings->Image provisioning will allow you to set the time.
Note: 1.4 also contained a fix to speed up file transfers too.
07-19-2017 03:25 PM
Sure is.
PnP->Settings->Image provisioning will allow you to set the time.
Note: 1.4 also contained a fix to speed up file transfers too.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide