Netconf/yang - Need help with "router ospf" no passive-interface

[etamminga]

Hello,

Can someone share a config fragment that configures "passive-interface default" as well as a "no passive-interface vlan100".

Cannot seem to find a solution to push both. 

IOS-XE 17.6 on Cat9400.

Regards,

Erik

[Alex Stevenson]

Hi @etamminga,

The Cisco-IOS-XE-17.6.1 Release Yang Models can be found here:

https://github.com/YangModels/yang/tree/main/vendor/cisco/xe/1761

For OSPF, I looked here:

https://github.com/YangModels/yang/blob/af90c053a1ca9b01a3f229e313e4af7e5b849c87/vendor/cisco/xe/1761/Cisco-IOS-XE-interface-common.yang

Hope this helps!

[Marcel Zehnder]

Hi Erik

There was /native/router/ios-ospf:ospf/ios-ospf:disable, but this is obsolete by now. Actually I tried to workaround it, but didn't find a solution. So I just posting here, to keep notified once someone come up with a solution.

Marcel