AppD Lab controller access

alexanderspa · ‎03-28-2024

i'm not able to reach the VM? What to do?

mfr-6 · ‎03-28-2024

Please make sure you have VPN connection established to the lab environment. Also please give it 5-10mins to be sure all services are up and running.
Also please see if you have an IP connectivity - ping the VM to see if it responds. If not - try to tear down and spin up lab again.
The details about VPN connection can be found on a devnet sandbox page, click on a "Environment" on the left side of a page, then click on your running environment and then select "Quick Access" button on the right - you will see credentials and VPN gateway to which you need to connect.

Mateusz Frak NetDevOps | DevNet | Automation
Please mark this post as helpful if it solves your issue, to make this visible for other users, thank you!

Ruben Cocheno · ‎03-28-2024

@alexanderspa

If you can ping it, check services and/or try to reboot it.

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/