router vpn setup for sandbox collaboration labs

[David Cebula]

Trying to use the sandbox Collaboration labs and would like to be able to have a hardware vpn connection so I can connect physical phones to the collaboration setup. I have a 881G-W router available. I have not been able to find current instructions for the setup. Thanks.

[zowu]

Hi David,

Please check HW VPN sample settings below.

- groupname may vary on vlan you assigned, please reach us when your lab ready and we will send you the corresponding groupname.

- username & password can be pasted from the lab ready mail

!---------Config Section 2 | VPN Config---------------!

interface Virtual-Template1 type tunnel

no ip address

tunnel mode ipsec ipv4

!

ip dhcp pool SDM-POOL

option 150 ip 10.10.20.1

!

crypto ipsec client ezvpn TRAFFIC

connect auto

ctcp

group groupname_vary key groupname_vary

mode network-extension

virtual-interface 1

peer 64.103.37.21

username yourid password yourpasswd

xauth userid mode local

!

interface FastEthernet4

crypto ipsec client ezvpn TRAFFIC

!

interface Vlan1

crypto ipsec client ezvpn TRAFFIC inside