Edge Computing Infrastructure

Hello,I'm trying to use the USB port as serial.And this error message I receive when trying to activate the application with the JSON file : ioxclient app activate lxcusbread --payload dev_map.jsonCurrently active profile :  IR809-4GCommand Name: app...

I am out of resources.I have IR809 with 156-2.T3 with ioxvm 1.3.0-T.bin for the Guestos. I have tried 1.2.4.2-T.bin with the same issue.I can access the Guest OS but CAF is not working.root@IR800-GOS-1:~# monit summaryThe Monit daemon 5.14 uptime: 35...

Is there a way to use the numpy module for Python in the IR829?Please teach me how to use numpy module on IOx.I make the following PaaS App and deploy it.Deployment successfully complete, but App Status: STOPPED after a few seconds.requirements.txtfl...

I have tried to boot the latest IOx image that I could find (c800-universalk9_iox-mz.SPA.156-1.T1.bin), but the router refuses to load it.Does the latest hardened 819 with LTE (4G) support IOx?Many thanks,Stephen

We are currently working with the Cisco IR809 Gateway and its Integration with the LoRa Modem / LoRaWAN server.  While we have successfully installed the latest IOX , Setup the Ethernet Interface Config (GE0) and also setup the DHCP Pool for LoRaWAN ...

The storage for an app is flash by default. A new platform has a separate SATA hard disk for app storage. Is there a way to redirect storage explicitly?

The blue mini-USB console cable that is included with the IR829 (and other 800 series devices) connects the mini-USB console port, under the screwed down plate, to a USB port on your Mac.To use the "screen" command on OSX El Capitan 10.11 to connect ...

Hi Experts,We would like to run IoX on 891FJ but the resource requirement is challenging for our use cases.Is there anyone could confirm those considerations?1. For the storage: Do we support USB storage support on 891FJ? supported format or size?2. ...

HI All, Not sure if my search mojo is broken or not... I've been going through the IOx documentation and I can't seem to find any section that talks in detail or gives and example of what can be placed in the package_config.ini file. Per chance has a...

Hi, i'm having trouble getting an IP for an IOx application using bridge network while it works correctly on the NAT interface.DHCP pool is correctly configured but only the Local manager is getting the IP from that.I've attached a tech support repor...

Hi there, I have some problems adding a new IR809 into FogDirectory. It was freshly installed with the bundle named ir800-universalk9-bundle.SPA.156-3.M2.bin ( IOX: Cisco-GOS,version-1.3.2.3 , IOS: version 15.6 )As I've searched until now, it looks l...

Hi All, I have an IOx Application with the following Package.yaml. I have no idea why but everything seems to load in fine but the target parameter doesn't seem to start. If I open a console and run it, the app runs fine. However the moment I close t...