Hi I have an Ubuntu based docker and I run an application inside it which uses posix queues. I found that Docker doesn not have mqueue in its file system. I wanted to know how to acquire the file system in /proc/sys/fs of the docker . I did see the...
Forum Posts
Hi, everyone. I can generate, deploy, activate and run the my own Docker type C based application on the IR-1101, and this application works correctly using the IP protocol. But a requirement of this application is to run a GOOSE subscriber to receiv...
Hi everyone! The information related to the network interfce when I execute the 'show app-hosting detail' command does not include the IP address, as shown below. Shouldn't information related to the IP address be displayed? The commands to configure...
Welcome to the Edge Computing Infrastructure community forum. We'll be talking about all things IOx here. Please post your questions, use cases, stories, and best practices!
Hello,I am new to Cisco IOx and I am trying to run a Helloworld app on a Cisco IR1101 router with Cisco IOS XE Software, Version 17.03.01.I am following the information and using the files from a guide on github: https://github.com/etychon/iox-aarch6...
I have created TCP port mapping of application from IOx Local Manager. However, I don't see any option to delete it. The application is not running and it is in deployed state. Please let me know how to delete the port mapping.
I have installed an application in the IOx Sandbox. The application stores users data in a file and that file needs to be mounted outside the container so that the data in the file is not lost when the container restarts. Please let me know the file ...
Hi,I'm trying to deploy an app into my IR1101, but when trying to start the application I get the following message:"Error while starting the app: Container doesn't seem to have a pid! Saw a similar error in a previous topic (link here) in which rebo...
I have configured IOS according to :Phase 3 – Configuring Cisco IOS to Enable Access to Cisco IOx - IOx - Document - Cisco DevNetI connect my computer on G0 and can't ping the IOX guest-os in G2 and can't get into 8443 web page of IOX local managerhe...
Hello, I have several docker containers running on a Cisco IC3000 which I can manage through Cisco IOx Local Manager. I see that it's possible to mount an IC3000 volume into the container by using the option "-v" in the docker options as shown in the...
I want to know if it is possible to configure IR829GW with a web interface, if yes how to proceed please?
I'm trying to deploy a Docker image on a Cisco ISR 4321 with version 17.03.04a (latest suggest release on software.cisco.com). There are a few ways to send environment variables to the application, but I can't seem to get all of them working. When us...
I'm working with an ISR 4331 running 17.03.03, and deploying containers. The router has a routed lo0 interface which is used as the management IP. We don't use the built-in mgmt0/g0 interface, and I don't want to provision a routed network on a virtu...
Morning, I was looking for some advice/information on whether I should carry on learning about IOx to deploy a simple Python based app to monitor the router status on a ISR1K. This will do the guestshell deployment but Im having issues getting it to...
Hi all, I would like to host a custom Debian lxc on ISR 1100 platform. Ultimately, I would like to host something like perSONAR, but this is an open question on what is possible? Has someone been successful hosting a custom app on ISR 1100 series, no...
