Edge Computing Infrastructure

Hi,I'm wondering whether it's possible to bridge physical interfaces on a ISR4351 to an IOX app?  What I would like is to have an app with 2 interfaces. One bridged to int gig 0/0/0 and another bridged int gig 0/0/1.I know i can create VirtualPortGro...

HI there, I am unable to find the correct MIB for the particular image I have searched them in this link provided by the documentation . https://cfnng.cisco.com/mibs. I would also like to know Whether this value can be acquired by an application insi...

The blue mini-USB console cable that is included with the IR829 (and other 800 series devices) connects the mini-USB console port, under the screwed down plate, to a USB port on your Linux machine. The trick is identifying the specific device to use ...

While using ioxclient to sign the docker image, I always got the errer belowThe private/public key and ca certificate were generated by openssl in pem format.ioxclient.exe docker pkg -k privkey.pem -c CA.pem testapp:2.0 ./dev Currently active profile...

HI , I have an IR829 GW Device, I would like to deploy an application that requires rf metrics as input . Im aware that IoS commands provide the RF metrics through show comamnds. Is there a way to access the rf metrics thIR829, IOx on IR829rough an a...

Hi all, I've been playing with iox and it is super fun but I hit some problem and cannot solve it.Switch: C3850-48PIOS: 16.12.4IOx is enabled on the switch and guestshell is running - so far so good - I wrote super simple/short python script:import ...

The blue mini-USB console cable that is included with the IR829 (and other 800 series devices) connects the mini-USB console port, under the screwed down plate, to a USB port on your PC. The two main aspects to think about when using Windows as a cli...

Hi, everyone. Through minor adaptations in the Cisco roadmap for the demo application, I can generate, deploy, activate and run the my own application (with id SGG) on the IR-1101. As can be seen below through the response to the 'show app-hosting de...

Hi everyone!I am following the Tutorial: Build Sample Docker Type C Based Simple App (https://developer.cisco.com/docs/iox/#!tutorial-build-sample-docker-type-c-based-simple-app/overview), and all the steps described in the tutorial work, except the ...

I'm on a C819 running c800-universalk9_iox-mz.SPA.156-3.M5.bin trying to do some experiments on IOx. All IOx-related config commands and show commands run very slowly and sometimes fail, while other config commands work very well. After configured ev...

Hi, Expert      After upgrading my CAT 9300 IOS image from 16.6.6 to 16.12.4, all my old error messages have disappeared. But the installation of the IOx docker app still had problem. This time, it is this one. zbmvsw9300-01#app-hosting install appid...

Hi, Expert.       After I used ioxclient to build the package.tar file, I was installing it on Cisco 9300 switch. But I ran into a problem complaining schema version 2.8 is not supported. I used scheme version 2.8 and IoX version 16.6.6. Does anyone ...