Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 

Internet of Things (IoT)

Collaborate with your peers and Cisco on all areas of IoT to discuss what happens when the internet and networks expand to places such as manufacturing, energy grids, healthcare facilities and transportation.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Browse the Community

Activity in Internet of Things (IoT)

Start a conversation

Cisco IR829 does not get ip address

hello i am trying to configure my cisco 829 with this simple code snipped but the device refuse to ping 8.8.8.8 or 0.0.0.0 etc and the cellular 0/0 or 1/0  refuse to get ip address, i use a generic sim card and i dont know if the problem is related t...

Small Smart Factory Area with AGVs

Hi Guys, I will be using IW9167 in UWRB mode for an AGV use case but I am stuck what external antenna to use. I will be placing my AP at the metal column about 6 to 7 meters from floor. Not sure which antenna is best either omnidirectional or directi...

C9115AXI-E and SoluM ESL USB gateway

Hello,could someone please, help me with the issue that I have?I saw this document https://documentation.meraki.com/MR/Deployment_Guides/SoluM_Electronic_Shelf_Labels_(ESL)_Integration_with_MRsBut in theory is it possible to connect C9115AXI-E and So...

Cisco PIX 515E help

Hi, I collect vintage Cisco networking equipment. I have a Cisco PIX 515E.I can't seem to reach the outside internet with it. Here is my config: RDXLFW1# sh ru: Saved:PIX Version 7.2(2)!hostname RDXLFW1enable password 8Ry2YjIyt7RRXU24 encryptednames!...

RadxD461 by • Level 1
  • 208 Views
  • 2 replies
  • 0 Helpful votes

ISR4331 IOx VirtualPortGroup issue

HelloTried to configure networking for custom Docker container according to https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2020/pdf/BRKARC-1002.pdf and notes from https://developer.cisco.com/docs/iox/#!isr-4000asr-1000-series-application-devel...

Adding PC to control garage doors

Hello! I'm currently working on lab 6.3.2.3 Packet Tracer - Prototype & Test the Solution. The basic logic is to monitor the current status of garage doors. I wanted to add to Home Wireless Router, expect laptop and pc connected to it, one more pc by...

Gugolsan by • Level 1
  • 150 Views
  • 0 replies
  • 0 Helpful votes

IE 3300 industrial grade switches

Hi  one of our customers has IE3300-8P2S-E switches in their environmnet, recently they are in need of few more switches. i was not able to add the same in BoQ. i was suggested to "IE-3400-8P2S-E++" as a replacement available with no specific reason ...

IR1101 P-LPWA-900 Module Deployment

Hello,I'm trying to deploy a P-LPWA-900 LoRaWAN gateway module on an IR1011.  To connect it to AWS, two certs need to be installed.On an IXM, there is a cert install command to be able to do this.  Is there an equivalent command to be able to do this...

Resolved! IR1101 support for Guestshell and Python

I am unable to activate Guestshell on the IR1101 running 16.12.3 as the router complains about missing a tar file. Is this supported? Do I have to download the tar file separately?Thanks! RogueTwo-RA1#sh run | i iox iox RogueTwo-RA1#guestshell enable...

VTP over PRP Channel

IE4000 (or Stratix 5400) user question:  Has anyone successfully made VTP version 3 (or v2) work over a PRP interface?   Debug sw-vlan * seems to show the VTP library transmitting VTP on the PR1 meta-interface instead of the underlying physical inter...

Load more
View All