Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
My customer keeps getting the following alarm:the following SyslogSeverityMatchFound events generated: SeverityMatch - Alert : 18: Dec 16 09:54:19.494 UTC : %CCM_LICENSEMANAGER-JAVAAPPLICATIONS-1-CiscoLicenseApprochingLimit: License units consumption...
We had a spanning-tree issue that was cleared. After network was restored our Corporate Directy is stuck on "Requesting."I am new to Csico VoIP. We are on Call Manager 7. Anything I should check? I have restarted my phone also to no success.I know ou...
I have a customer using separate voice and data networks using separate VRFs and firewalls. the customer now needs to implement soft phones on the data network Does any one have any design best practices for this? i.e qos, route leaking etc how do pe...
Hi All,I have a four port FXS card installed on the 2851. The fax machine is connected to one of these ports.The client complains about only receiving half of the fax, and they have tried another fax machine on this port.My question is what is the co...
Hey everyone,I am simply trying to determine the software version of a cisco BTS using a Solaris box. When I run show ? there don't appear to be any commands along the lines of "show version" or anything like that. Is there a way I can determine the ...
Hi all,I faced this problem and I need your help.I have SRST branch uses 3945 router with 4 FXOs. B-ACD configured for AA.when I am entering the extension like 1234 the phone is ringing. But if I pressed answer, another incoming calls ring the phone ...
Hi,i'm new to IPT and need to figure this out.currently we have two 2921 voice gateways and 22 VG224. can i replace all these devices with two big gateways say 3925 with SRST?we have 450 IP phones and 200 analog devices. can these two big gateways ha...
hello all,can anyone from these forum let me know steps to install cucm 7.0 in vmware esx server 4.1 PUB/SUB i do have the isntall dvdthanks
Say I have a 3rd party SIP endpoint registered to CUCM. CUCM is registered to a gatekeeper and the GK also has a H.323 endpoint registered to it. Calls between the the SIP endpoint and the GK registered H.323 endpoint work great.Why does this work ...
Hi,How do I export IP phones and user information from CCM 4.2(3) to CUCM 7.1(3)? I need to preserve DN, User, Speed Dials, etc. My CCM 4.2 (3) BAT tool version is 5.2(3a). We stood up a new CUCM 7.1 cluster. Because the flash-cut option is not avai...
Hey everyone. I have a CallManager 7.1 server. What is the new services link for direct fast dials that bypass the Personal Address Book?Please let me know.Thanks!Ohamien
Dears,We are newly configured Mobility feature in CUCM 6.3(b), the feature is working fine but Caller ID not displaying in Remote device.Looking for your valuable information to sortout this issue....Regards,Edwin
Hello, I need to perform CUCMBE redundancy, is this available in CUCMBE 8.0 or not?and if Yes, what the product number which can i use?Thx
I'mhaving troubles with the 7975 set and the background images on UC520. When I select the backgrounds I get the display selections unavailable and when I run a debug it says TFTP: Looking for Desktops/320x216x16/List.xml and nothing else it just sit...
I have a Cisco MCS-7835H-3.0-ECS1 server with 256MB DDR 266MHz memory strips. Can this server be upgraded using 512MB DDR 333MHz memory strips?
