Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,Trying to retrieve the serial number for the above? Does anyone know the OID? Not much luck searching.Many thanks.
Hello was wondering if someone could help me out here. We use broadsoft along with cisco ata192 for analog phones. I am trying to use the speed dial 100 feature which is setup with the prefix #. I can use the add feature through the phone and it will...
Unity 11.5.1 time off by 14 minutes. CLI on the server confirms the incorrect time, but the Timezone is set correctly. Please advise.
Hi, I have an 8841 IP Phone that is(was) connected to Webex Calling. Several months the phone was working without issues. Suddenly the phone goes into Registering. Never registers back onto Webex Calling. The phone is reset to defaults, device was re...
Hi ,Please help me with the CLI steps to upgrade call manager from 11.0 to 11.5 SU7
Hello Friends, I would like to share my recent experience on one of the Cisco Unity Connection error.Recently we were facing some challenges to delete Unity users where we get the error "Object Not found"This issue was not allowing me to delete the u...
Dear All,am having cisco cme router 2921 with version 9 cme.I need to get the calls log reports in the same format of cme report-->call history (start time - originating number - destination number - duration) for a long period of time like 3-6 month...
Trying to bulk create Jabber CSF phones, but keep getting errors. I started with All Details and have slowly dropped to specific and very few, but the following error keeps happening... Failure Details : MAC Address/Device Name Error Code Error Descr...
I started looking at my Call Management Records in CUCM 10.5. I am getting information like Record Type and Call ID info, but the performance counters are blank. The information I want is Packets Sent / Received, Jitter, Latency, etc. These fields ar...
I am attempting to configure a number of Cisco phones to resync between 1-5am. I have the following settings Resync At (HHmm): 0100Resync At Random Delay: 14400 I'm having an issue where the phone may reprovision several times per night. I have a CP-...
Team, We are planning CUCM migration to a new UCS server, existing ESXi version is 5.5 and CUCM version is 11.5.1 SU2 and new server is having ESXi 6.5, the new CUCM will be 11.5.1 SU4. i was thinking to use PCD for the migration and while se...
Hello Experts,ITSP has provided 10 SIP extension lines, and lines are capable of both incoming and outgoing features too. we have around 45 IP phones and everyone needs to call outside using destination Pattern 9Thow to configure translation rule for...
Cisco 8865 VPN IP Home office Phone stuck in a repeated auto loop - recalling the last call list.I have created a 2 min video https://photos.app.goo.gl/6QDkxrQELKRWZFna7 showing what is happening for your reference. In the video you see the issue sta...
CUCM 10.5 We have a site in Mexico where I have multiple CSS's and route patterns setup to allow for different outbound call types. local, LD, US interational, celluar etc. There is an issue where the 7937 conference phone will not dial out to any ...
Hello, I have Cisco 2851 router with 2 FXS port card which is inherited from another sister company. I would like to use this router in LAB using on analog line and installing CUCME version 8.1.My question is Can I directly connect the rj11 t...
