Direct SIP Trunk to MSFT OCS without Call Manager

[stanleyworks]

guys

i m trying to configure sip trunk from cisco CUBE router a 2811 to MSFT OCS without involving call manager.Before i have this configured and working fine with Call Manager 6.1.Is there any sample configs that anyone can share to make this work.

appreicate all your help.

[gogasca]

Hi,

voice service voip

no notify redirect ip2ip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

no supplementary-service h225-notify cid-update

supplementary-service media-renegotiate

supplementary-service ringback h225-info

fax protocol t38 ls-redundancy 2 hs-redundancy 2 fallback none

sip

bind control source-interface FastEthernet0/0

bind media source-interface FastEthernet0/0

midcall-signaling passthru

dial-peer voice 5000 voip

Description to OCS Mediation server

preference 1

destination-pattern 22...

session protocol sipv2

session target ipv4:1.1.1.1

session transport tcp

dtmf-relay rtp-nte

codec g711ulaw

ip qos dscp cs3 signaling

no vad

Just be aware of CSCsw34198