Hi
I am facing problems with FXO ports in my H323 2811 router.
FXO is pointed to a Unity call handler with Greeting "Welcome to...If you know the extension please dial now" Then the caller dial can hear the message and when dial the extension the system don´t receive all digits. I run debug vtmp dsp and check that not all digits are receive therefore the call cannot reach the final extension
Sample debug. The caller dial "1139" during the greeting and system cannot forward the call because only receive "139"
*May 13 11:48:53.167: //12642/xxxxxxxxxxxx/CCAPI/cc_api_call_digit_begin:
Consume mask is not set. Relaying Digit 1 to dstCallId 0x3163
*May 13 11:48:53.167: //12642/xxxxxxxxxxxx/CCAPI/cc_relay_digit_begin_for_3way_conference:
Check DTMF relay digit begin for 3way conf
*May 13 11:48:53.207: //12642/xxxxxxxxxxxx/CCAPI/cc_api_call_digit_end:
Consume mask is not set. Relaying Digit 1 to dstCallId 0x3163
*May 13 11:48:53.207: //12642/xxxxxxxxxxxx/CCAPI/cc_relay_digit_end_for_3way_conference:
Check DTMF relay digit end for 3way conf
*May 13 11:48:53.795: //12642/xxxxxxxxxxxx/CCAPI/cc_api_call_digit_begin:
Consume mask is not set. Relaying Digit 3 to dstCallId 0x3163
*May 13 11:48:53.795: //12642/xxxxxxxxxxxx/CCAPI/cc_relay_digit_begin_for_3way_conference:
Check DTMF relay digit begin for 3way conf
*May 13 11:48:53.827: //12642/xxxxxxxxxxxx/CCAPI/cc_api_call_digit_end:
Consume mask is not set. Relaying Digit 3 to dstCallId 0x3163
*May 13 11:48:53.827: //12642/xxxxxxxxxxxx/CCAPI/cc_relay_digit_end_for_3way_conference:
Check DTMF relay digit end for 3way conf
*May 13 11:48:54.403: //12642/xxxxxxxxxxxx/CCAPI/cc_api_call_digit_begin:
Consume mask is not set. Relaying Digit 9 to dstCallId 0x3163
*May 13 11:48:54.403: //12642/xxxxxxxxxxxx/CCAPI/cc_relay_digit_begin_for_3way_conference:
Check DTMF relay digit begin for 3way conf
*May 13 11:48:54.455: //12642/xxxxxxxxxxxx/CCAPI/cc_api_call_digit_end:
Consume mask is not set. Relaying Digit 9 to dstCallId 0x3163
*May 13 11:48:54.459: //12642/xxxxxxxxxxxx/CCAPI/cc_relay_digit_end_for_3way_conference:
Check DTMF relay digit end for 3way conf
I below details fxo config
!
voice-port 0/1/2
connection plar 2002
caller-id enable
!
dial-peer voice 5 pots ---------- outcoming calls is working fine
preference 1
destination-pattern 6T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
direct-inward-dial
port 0/1/2
prefix 6
!
dial-peer voice 22 pots --- incoming calls have the issue with dtmf
destination-pattern 2002
port 0/1/2
!
