11-01-2017 03:14 PM - edited 03-17-2019 11:31 AM
I try to register CUCM 11.5 with( MGCP protocol) Home lab, router shows register but application gateway status show non. how ever only one softphone show register and get IP address. what will I need to done get register with MGCP. I also attach my configuration
11-01-2017 03:49 PM
Is there a cable with a live T1/E1 connected to that port?
If not, that's the reason it will not register.
11-01-2017 06:34 PM
I don't have T1 connections and i just remove from application gateway and disable in router and still have same issue , should I remove wic-2t card from router.
11-01-2017 08:31 PM
OK, if you DO NOT have a live circuit connected to that port, it WILL NOT register with CUCM.
That is the expected behavior.
11-02-2017 06:47 AM
The same router i was running cucm 8.6 work fine without any issue only 11.5 is not to get register or not getting ip address from router .Do you think might is certificate (tomcat) issue? because router is shows register.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide