VG202 configuration automatically pushed from CUCM

[cvanitterbeeck]

Hi all,

I'm busy configuring some VG202 but it seems that at every apply config or reset, that some parameters are coming from the CUCM and this is making my configuration fail (with fax).

Here are the points that are automatically pushed

voice-port 0/0

 cptone GB

 timeouts initial 60

 timeouts interdigit 60

 timeouts ringing infinity

Is it possible to avoid that? How?

Thanks

C.

[cvanitterbeeck]

Idea is to remove the timeouts at 60 seconds to shorten that.