Hello,
i got the following message when i enter this command: neighbor VPNv4 activate under address-family vpnv4
% Activation failed : configure "bgp listener range" before activating peergroup os SR 920
this is configuration
router bgp 65500
neighbor VPNv4 peer-group
neighbor VPNv4 remote-as 65500
neighbor VPNv4 update-source Loopback0
neighbor VPNv4 password PW-Cisc0123
!
address-family vpnv4
neighbor VPNv4 activate
neighbor VPNv4 route-reflector-client
neighbor VPNv4 send-community extended
neighbor 172.16.1.3 peer-group VPNv4
neighbor 172.16.1.5 peer-group VPNv4
exit-address-family
However my peering is up
rtr-01#show ip bgp vpnv4 all summary
BGP router identifier 192.168.1.2, local AS number 65500
BGP table version is 1, main routing table version 1
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
172.16.1.3 4 65500 21 22 1 0 0 00:17:49 0
172.16.1.5 4 65500 21 22 1 0 0 00:17:58 0
my cluster RR is configured on ASR 903
this is the version of my IOS XE
rtr-01#show version
Cisco IOS XE Software, Version 16.07.01
Cisco IOS Software [Fuji], ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 16.7.1, RELEASE SOFTWARE (fc6)
Cisco IOS XE Software, Version 16.07.01
Cisco IOS Software [Fuji], ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 16.7.1, RELEASE SOFTWARE (fc6)
does someone has any idea about this message
Thanks