08-25-2017 07:05 AM
Hi team,
I have a problem, when I use ISE(version 2.2 patch 2) and 3850(version 16.3.3) to do 802.1x. After authorization my pc got the IP, but in 3850 I got IPv4 "Unknown", and I can not configure "ip device-tracking"... Could someone help me.
sh access-session int gi1/0/1 details
Interface: GigabitEthernet1/0/1
IIF-ID: 0x1C081FBC
MAC Address: 101f.7456.4e61
IPv6 Address: Unknown
IPv4 Address: Unknown
User-Name: robin
Status: Authorized
Domain: DATA
Oper host mode: multi-domain
Oper control dir: both
Session timeout: N/A
Common Session ID: 0A0912100000001D19A4C08F
Acct Session ID: 0x00000015
Handle: 0xe4000012
Current Policy: DOT1X-DEFAULT
Server Policies:
Vlan Group: Vlan: 18
Security Policy: None
Security Status: Link Unsecured
ACS ACL: xACSACLx-IP-PERMIT_ALL_TRAFFIC-57f6b0d3
SGT Value: 5000
Method status list:
Method State
dot1x Authc Success
mab Authc Failed
Solved! Go to Solution.
08-28-2017 05:06 AM
08-25-2017 09:17 AM
Device tracking is the way the switch learns the IP. Why can't you enable IP device tracking?
08-28-2017 12:16 AM
I tried with command "ip device-tracking":
3850SW2(config)#ip device?
% Unrecognized command
3850SW2(config)#ip device
08-28-2017 05:06 AM
I found myself:
int gi1/0/1
device-tracking
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide