Resolved! ACS integration with Azure AD
Does Cisco ACS 5.7 supports AD integration with Azure Active Directory?
Does Cisco ACS 5.7 supports AD integration with Azure Active Directory?
ExpertsIs it possible to pop up a page or information when ISE sends an access reject during authenticationThanks
I'm getting some odd behaviour with a Catalyst switch and 802.1x. I am using multi-auth, with a PC and Cisco Phone patched in. Both devices authenticate correctly, but only the PC is authorized based on the switch logs. Switch terminal logs: Apr 7 0...
Hi, I have configured guest type so that we won't have simultanous logins and also guest will only connect from 1 device. But it is not working well. Attached is the configuation I did. Can anyone tell me if I did something wrong? Thanks!
Endpoint connects to a Cisco switch (that supports SGT insertion/SGACL). Endpoint is correctly profiled, and CoA (SGT) is passed back, and the switch shows the correct SGT-IP binding. SGACL's are config'd to by dynamic, and when doing a "show cts r...
On switches when the management interface is down (vlan1), we cannot login from the console using the local username and password. if the management interface is up but TACACS is not available, it works fine for a vty interface. If you connect to con...
I was trying to upgrade ISE in standalone deployment from 1.2.1.198 to 1.3 - My file name and size is same as what I see in the cisco.com download section (name: ise-upgradebundle-1.2.x-to-1.3.0.876.repackaged.x86_64.tar.gz, size: 4.02 GB (4,326,538,...
Dear, We are doing dot1x tests in ISE 2.0 on all of our equipment. Version 15.2(3)E1 / 3560-CX we are experiencing some fairly strange behaviour, this type of device is new, so no devices are in production whatsoever. When disconnecting/connecting ...
Hello, my customer as a Cisco Identity Service Engine version 1 serveur and wish tu upgrade it to version 2; Does this require to purchase new licenses or can he keep the existing one ? If yes which are the reference ? There is no ordering guide for ...
Hello, I'm working on cisco AAA Lab. I have configured a method list for authentication using the following command R1(config)#aaa authentication login TELNET local enable I did not added any user to the router. Then I applied this method list on ...
Hi Guys, We´re facing a reauthorization problem related with Anyconnect 4.1 after Authentication timer inactivity on the switch port expire, after the time expire, the sesson goes to the Unknow state (normal behavior) but when the user starts to wor...
Hi team,With a Windows 10 workstation, I used a posture policy to check Windows Firewall activation. if the FW is disable i would like to reactivate it .so I use the following policy to lauch "netsh advfirewall set allprofiles state on" to restart FW...
Hi community, I have currently the problem that my customer wants to enable CRL verification. Ehe CRL is only published into the Active Directory. Regarding the ISE documentation ldap is supported as a CRL Path. Unfortunately the CRL is not retriev...
Hi, I am using an evaluation of cisco ise 2.0 . I have two ssid .One using EAP-PEAP , another using EAP-TLS authentication and i have local microft CA. So how can i do the certificate process in ISE Thanks
Hi ISE Team,Customer currently has 5000 Mobility licenses installed on their ISE Administration Node.They are in the process of obtaining 20,000 ISE Base licenses to replace the Mobility licenses with. They do not have these Base licenses yet, becau...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
05-03-2024 05:45 AM | ||
05-03-2024 05:01 AM | ||
04-18-2024 10:01 PM | ||
04-18-2024 08:46 AM | ||
04-02-2024 12:38 AM |
User | Count |
---|---|
7 | |
7 | |
5 | |
2 | |
1 |