Network Access Control

hi. have a issue with installing the Cert on ACS 4.2 . recently our ACS cert is expired and we got the new cert and installed.when accessing https://ACS:2002/ Cert error." There is a problem with this website's security certificate " I checked the ce...

I am configuring SSH access on our switches, routers, and firewalls and want to know if I can configure Internet Authentication Service on our Windows 2008 server to authenticate these SSH users.  I know we use it now for our VPN users but am not sur...

HiWonder if any one has an idea on this?We have two ACS, 1 windows and 1 appliance.The appliance is the primary ACS.The other night all our wireless devices failed to authenticate.  We tracked this down to the Windows server with the ACS Agent on it ...

We have several ASA 5510 firewalls which are being used as VPN gateways.RSA SecurID is the authentication mechanism using native SDI connectivity.No ACS server is being used.Is it possible to assign user Group and other attributes (such as ACL), usin...

Hello,        We have a setup where currently a single workstation is configured with 2 project data vlans using the 801.x setup and is working perfectly without any problems or glitches, however here is the problem.I am transitioning both these proj...

Fresh build, patched to 5.2.0.26.2 no problem.Then, patch the box to 5.2.0.26.3:exc2-acs-1402/admin# acs patch install 5-2-0-26-3.tar.gpg repository networktools-patchInstalling ACS patch requires a restart of ACS services. Continue?  (yes/no) yesSto...

I have ACS 4.2 124.12 cumulative patches installed.  I have enable EAP-FAST in ACS.  The CA is selected in the trusted list.  When I try to authenticate with the ACS I get a rejection.  Wireshark shows in the challenge that this is a 'unsupported Cer...

I have a new install of ACS 5.2 added to our 2003 AD.  I am using PEAP for wireless auth, and have ACS set to verify the user is a member of the wireless users security group in AD.  If the user has never been a member of this group, wireless auth fa...

Hello.I need to start and stop Windows service using a batch.What is the correct order?Thanks.Andrea

Hello, I'm installing an ACS 5.1 and I'm trying to authenticate users for network access using one identity store and authorize the same user using another identity store (AD).  What I'm seeing is that the access-request after authentication is OK, b...

We are assuming responsibility for a set of network gear from a vendor that developed an app for us. They had all the gear authenticate against their radius server. My task today is to remove that config, and point to our ACS servers using tacacs. I ...

Hi,aaa authentication login user-list group radius local!radius-server host 10.1.1.3 auth-port 1645 acct-port 1646 key xxxxradius-server deadtime 10If i add more radius-server host such asradius-server host 10.1.1.4 auth-port 1645 acct-port 1646 key ...

Hi,I am not able to backup ACS 5.x server by means of SFTP protocol. We use ACS 5-2-0-26-2. My configuration of repository is:repository SFTPurl sftp://x.x.x.x/home/useruser user password hash 455adcommand 'backup acs01 repository SFTP' does not work...