Network Access Control

I am trying to block mobile phones from a policy. The issue is that If I look at my authz policy and go to 'Identity Group-Name' EQUALS I don't see all profiled built-in groups. For example, my phone that gets profiled Apple-Device, where does that m...

is there a tac_plus.conf file on the Cisco ACS 5.8 virtual appliance. I'm trying to assign the admin role to a group. See the example below.  host = 10.5.0.141 {}# We also can define local users and specify a file where data is stored.# That file may...

Greetings Gents, I am ordering 700 base and plus licenses. If we go up that threshold, would ISE still enforce policies on those that went over 700 ? Regards,Edouard.

Hello How can i assign a static ip to a user logged in on a Cisco 2921 by anyconnect?  best regards  

Hi All- I have a two node ISE cluster ver 2.7 SP2.  I will be using this for a DNAC deployment.  Node 1 is Primary Admin, Secondary MonitoringNode 2 is Secondary Admin, Primary MonitoringBoth nodes show personas of "Administration, Monitoring, Policy...

Hello folks, I've got AnyConnect VPN set up on FTD and I want to write a different policy set for AuthN/AuthZ based on the group-policy that they're attempting to connect to. For example, if a users tries to connect to Group_A, I want them to hit a s...

Hello All,I need to know is there a way where in i can switch from IBNS2.0 style of configuration to IBNS1.0 style of configuration on the new IOS XE switches. I did try the command  "authentication display legacy", however, this command is not execu...

I have been tasked to manually move all devices using TACACS+ authentication on an ACS 5.3.0.40 to ISE 2.6 (Patch 7).  I have moved a majority of our switches and routers to ISE successfully and I am currently attempting to move two Nexus 5548 switch...