Network Access Control

We have an issue regarding ACS to ISE migration and I don't know if you ve encountered it before.Back-up was done from production ACS 5.8 patch 6 and imported to the LAB/migration ACS 5.8 patch 6. Migration tool was used to migrate config from the mi...

Dear all,My customer need the comparison between posture agent and agentless. Would you please help provide this information ?Best Regards,An

Hi,We are deploying ISE 2.4 with Anyconnect 4.6.Customer is developing software tool for automatic remediation.They want to know whether ISE supports posture related APIs so that upon each posture failed condition on every endpoint, ISE will inform s...

hello,Is there a way to find the up times of our PSNs via the ISE GUI?

Hello,We are seeing some strange behaviour on Catalyst 4K SUP 8 running 03.06.04.E 1. One configuring the below interface commands the machine is denied access as "no sessions match supplied criteria" message is displayed by issuing "show authenticat...

Hello,I have a customer who is asking for the approximate release date of Patch 1 for ISE 2.4.  Is there anything we can share?With 2.4 aimed at being the Golden Release, the customer would like to upgrade to it.  However, they would feel more comfor...

Team, Please what happens after a month or more, if customer continues  to use more VM nodes than what they are licensed for. The release notes says alarms are displayed in the Alarms dashlet for every 14 days.Release 2.4, if there is any mismatch be...

Hi Team,I have a customer that upgraded ISE from ISE version 2.1.0.474 to version 2.3 .0298 Patch 3. After the upgrade the system would not accept their existing license files and instead came up running a 30 day evaluation license.  Any thoughts on ...

Need to determine if/how I can configure ISE to send credentials (via email) of a self-provisioned guest to both the guest and the sponsor upon sponsor approval. I currently only see setting to send to the guest. My sponsors approve/deny directly fro...

Hello community,my customer is using DACL's in their network based on ISE profiling. Generally profiling is working fine. Except for ip phones.They have a mixed environment for ip phones: Cisco and Avaya.Cisco IP Phones are not an issue, but Cisco IS...

Hi,We are doing the Posture assessment with PC <-> SF500 <-> ISE 2.4.We wants to use the SNMP COA Reauthenticate for posture assessment.on PC, we have AnyConnect running to check the posture.I would like to ask for the OID of SF500 for SNMP CoA reaut...

We would like to know how many customers installed Trust Sec worldwide. We need to write it down in a RFP.