ISE 2.0.0 support for Cat 9300/9400/9500

[nloverin]

I am trying to find if ISE 2.0.0 works with the newer Catalyst 9300/9400/9500.  I see here:

https://www.cisco.com/c/en/us/td/docs/security/ise/2-0/compatibility/ise_sdt.html#pgfId-223240

that Catalyst 9000 Series Switches are validated with Cisco ISE, Release 2.0.1 Patch 4.  Will ISE 2.0.0 also "work", or has this not been tested?  Or will it simply not work?

Thanks.

Neil

[Jason Kunst · Accepted solution]

https://communities.cisco.com/docs/DOC-75329

[kthiruve]

Cat9k is a newer platform that came way after ISE 2.0.x. Please see the link provided by Jason for questions related to support for HW. Use the ISE compatibility chart to see what ISE versions are validated with.

If Cat 9k is used for Intent based networking using DNAC you need ISE 2.3 for that.

-Krishnan