ISE 2.2 patch 9 add network device IPv6 address

[harrzhan]

My customer tries to add IPV6 address for a switch, and it seems the 2.2 does not allow IPv6. on 2.4 it does allow

I do not see any documentation on this.

is it allowed, or is there some configuration extra I would need to add?

[Damien Miller · Accepted solution]

This is documented in the ISE admin guides. 2.0 - 2.3 had limited IPv6 support, 2.4 introduced ipv6 radius NAD support, 2.6 introduced further ipv6 platform support.

2.2 - Limited ipv6 support
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_00.html#concept_1DDC955BCC5446FF8A10F4E33291D84F

2.4 - Addition of ipv6 for radius
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/release_notes/b_ise_24_rn.html#concept_69439F0092E84417BD8524AE997D7A17

2.6 - Further improvements to ipv6 support
https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/admin_guide/b_ise_admin_guide_26/b_ise_admin_guide_26_chapter_00.html#concept_1DDC955BCC5446FF8A10F4E33291D84F