ISE 2.4 Wireless wizard shows "Failed to configure WLC : WlcConnectionSetupFailed"

[Sergey Shulgin]

Hello Sirs!

Could someone help me to resolve the issue with the ISE. Both: WLC and ISE reachable and can communicate. I can integrate them manually. I did it (but for wired LAN 802.1X)!

Now I have to implement the Guest access (self-registration), and beleave that the Wizard will do it better than me )

On both sides I cleared all configurations related with AAA. Reload all twice. But avery time get the error: Failed to configure WLC : WlcConnectionSetupFailed

[RichardAtkin · Accepted solution]

Did you review this - below - there are various caveats and limitations to consider...

https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide_24_new_chapter_010.html

[Sergey Shulgin]

 Thank you Richard!

[manvik]

Hi,

I am also having same issue, using ISE 2.4 and Cisco 5500 series WLC.

I did a full reset of ISE using "application reset-config". Can you please help me get it working. Is there nay place I can logs of this connection failure.