11-01-2012 01:32 AM - edited 03-10-2019 07:44 PM
Hello Guys,
one of our customers did a backup to local disk on the ISE. Later he tried to remove the file on the ISE node by running the delete command. Unfortunately the name of the file exceeded the 80 character limitation of the CLI delete command.
Is there any other opportunity to get rid of the backup file?
11-01-2012 08:53 AM
how many characters are you over when you try to run this command?
Thanks
Tarik Admani
*Please rate helpful posts*
11-01-2012 01:02 PM
Hello Tarik,
thanks for your reply. We are marginally over the the maximum - in fact just the full path is over the limit and not the file name itself.
disk://
--> a total of 80 characters
Thanks
Simon
11-01-2012 03:43 PM
I haven't run into this before but it sounds like a bug Here is what I would recommend:
1. ISE 1.1.2 just came out so you can upgrade your system and see if that takes care of the problem
2. If #1 does not fix the issue then you should probably contact TAC and get a root patch installed to gain root level access to the system. Once you have root access you can do pretty much whatever you like including deleting that file. After the issue is resolved request the TAC engineer to file a defect with the development team so they can fix this in the future release
Thank you for rating!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide