ISE posture using Meraki MS switches

[manvik]

Has anyone done Posture for endpoint devices like laptop, desktop etc with Meraki MS switches in the network. Posture conditions are Domain joined, AV etc.
Should 802.1x be configured on switches for this? It's ok if nay system is connected to nay port in the switch.
Once posture conditions are met they should be permitted to the network.

[marce1000]

 - FYI : https://community.cisco.com/t5/security-knowledge-base/how-to-integrate-meraki-networks-with-ise/ta-p/3618650

 M.

[manvik]

should 802.1x configured on switches for the basic ISE posture to work.
are there any configuration document for Meraki switch config for ISE posture.

[manvik]

when a user first time connects to local network, how can they redirected to the ISE portal to download and install ISE agent. Whenever a new user connects he/she needs to be redirected to download and install ISE posture agent, once posture is successful they'll be permitted to the network.
Thanks in advance.

[manvik]

any help on this please.

[balaji.bandi]

That will be change of authorization :

some document for reference :

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Adaptive_Policy/Adaptive_Policy_and_Cisco_ISE

look below meraki forum :

https://community.meraki.com/t5/Switching/Meraki-MS-switches-and-ISE-posture/m-p/216692

[manvik · Accepted solution]

There' a comprehensive document available in Meraki community - https://community.meraki.com/t5/Switching/Meraki-MS-Wired-Posture-with-Cisco-ISE/td-p/220229