09-01-2017 01:51 AM
Hi Team,
Customer asked 3 questions about command set,
Q1: How many command sets does ISE support?
Q2: How many commands can be defined in single command set?
Q3: What is max length of command can be defined in one command?
Thanks
DL
09-01-2017 01:40 PM
Hi Yong,
In theory, it should support a large number of commands inside a command set and large number of command sets.
I do not have information on the validated limit. Will get back to you on this.
That said, what is the requirement? How many commands does customers planning to use.
If your customer had ACS, ISE should support all the commands and command sets supported in ACS.
Can you provide more clarity on the ISE release and the need?
Thanks
Krishnan
09-05-2017 08:16 AM
Hi Krishnan,
Thank you, customer plan to buy ISE, so any ISE release can be accept.
and customer did not give us any a number they required, just asked us the limitation.
Did you find the number?
DL
09-07-2017 08:08 AM
Approximately how many of each is your customer looking to use?
09-11-2017 08:40 PM
If you are still interested in this inquiry, please provide the answer to my question:
Approximately how many of each is your customer looking to use?
09-11-2017 08:53 PM
Talked with customer, they cannot answer this question now, just want to know the limitation. They have plenty of network devices from different vendors.
09-12-2017 03:47 PM
We have not measure for such but no known issue reported.
I tested it in my ISE 23 and able to import 1000 command sets, and one of the command set with 1000 commands. Manually, able to create more than 4K characters for each of commands and arguments.
09-13-2017 07:18 AM
million thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide