Optimal RSSI for radius ISE 802.1x peap eap auth

[Islam Sallaj]

It has been mentioned to me that in an environment where a wlan using 802.1x peap eap auth using radius ise needs a specific RSSI rf coverage level

does anyone know what that level is? This wlan is 5mgz only. What should the expected RSSI LEVELS be?

[ammahend]

I don't think there is as such any RSSI requirement, however as best practice you want to have -67dBm on celll edge for voice and -70dBm at cell edge for data.

There is however a bandwidth requirement for deploying Cisco's radius (ISE), in case your controller is remote over a WAN link.

use the calculator enclosed.

**rate helpful posts**