11-16-2021 06:02 AM
Hi
So i have a switch it is 100% 802.1X / MAB config.
I have 4 Ports working.
description 802.1X
switchport access vlan 32
switchport mode access
switchport voice vlan 14
authentication control-direction in
authentication host-mode multi-auth
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
mab
dot1x pae authenticator
dot1x timeout tx-period 2
spanning-tree portfast edge
spanning-tree bpduguard enable
Changed vlan to device correctly
then i got 4 Ports, the deivces connect are idenityfied in ISE.
but the switch wont change vlan, still its the default vlan 32 assigned
The Vlan is new to the switch
"vlan 124
name COOLNAME"
its in the trunk that is in the Router
Interface MAC Address Method Domain Status Fg Session ID
Fa1/2 000f.b606.a988 mab DATA Auth 0A807E0A00000020001C733E
Fa1/1 0006.8e31.1fe0 mab DATA Auth 0A807E0A000000180015C8FB
Fa1/6 e430.221e.4d64 mab DATA Auth 0A807E0A00000025001D2A27
Fa1/8 e430.2220.ef8a mab DATA Auth 0A807E0A00000022001D2702
Fa1/7 e430.2220.ef88 mab DATA Auth 0A807E0A00000024001D2745
Fa1/5 e430.221e.4d62 mab DATA Auth 0A807E0A00000023001D2724
Fa1/4 0010.f38d.9482 dot1x DATA Auth 0A807E0A000000170015A3EC
Fa1/3 0060.3532.2fb4 mab DATA Auth 0A807E0A0000001B0015CA18
I dont really know where to look at this problem from.
Solved! Go to Solution.
11-16-2021 06:39 AM
Founds this, it was in ISE looks like the Policey is handel in a slight diffrent way. and i hade not noticed this!
11-16-2021 06:39 AM
Founds this, it was in ISE looks like the Policey is handel in a slight diffrent way. and i hade not noticed this!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide