cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7785
Views
3
Helpful
3
Replies

Which Hyper-V versions are supported for ISE

rmueller@cisco.com
Cisco Employee
Cisco Employee

Hi all,

customer would like to migrate his ISE-installation from HW-appliance to a virtualized for running on Hyper-V, which is now supported with ISE 2.2. Now the customer is asking if there are specific requirements for the Hyper-V version. The install-guide just tells about Hyper-V, nothing specific.

Thanks in advance.

Roland

1 Accepted Solution

Accepted Solutions

hariholla
Cisco Employee
Cisco Employee

The following are the Hypervisors supported with ISE:

  • VMware
  • Linux KVM
  • Microsoft Hyper-V

And the specs are listed here:

Cisco Identity Services Engine Installation Guide, Release 2.2 - System Requirements [Cisco Identity Services Engine] -…

View solution in original post

3 Replies 3

hariholla
Cisco Employee
Cisco Employee

The following are the Hypervisors supported with ISE:

  • VMware
  • Linux KVM
  • Microsoft Hyper-V

And the specs are listed here:

Cisco Identity Services Engine Installation Guide, Release 2.2 - System Requirements [Cisco Identity Services Engine] -…

Charlie Moreton
Cisco Employee
Cisco Employee

There are no specific versions of Hyper-V that are supported.  Hyper-V as a platform is supported.  Therefore, any Hyper-V version from Server 2008R2 (which is Hyper-V version 3.0) to current should be fine.

Is this version of Hyper-V tested with ISE 2.2?