Network Management

OID

How to search for specific OID on cisco site

Resolved! SMTP server with authorisation

Hi,I'd like to set up a notification service in LMS 3.0.1 to notify users about job results via e-mail.I have a SMTP server where a user has to authorise before he can sent an email.In LMS I have found CS -> Server -> Admin -> System Preferenceswhere...

Resolved! Router IOS enquiry

Hi all,Could anyone know what the difference between IOS 12.4 and 12.4T is ? What is the meaning of T ?Thanks a lotLeung Che Man

change track status via TCL script

I am trying to set the status of tracked object using action_track_set command available in EEM TCL. Relevant configuration from the router is below:track 203 stub-object default-state up!event manager environment _test_track 200event manager environ...

LMS 3.2 on ESX 4

HiIs LMS 3.2 supported on VMWARE esx version 4? is it tested by Cisco?Thanks

RFC 2544

hellois it possible that rfc 2544 test provide 100 or 99% result on running network? i also need the requirment for this rfc 2544 test?

LMS 3.1 Campus Manager - topology services

Sir,we are connect our LMS 3.1 portel thru our username & which is created on TACACS ACS. I am admin user and when I changed into map as per our network diagram.1. our other team (users) can get same updated map when they are login thru their usernam...

Resolved! LMS 3.1 Campus Manager - topology services

Sir,We are having core -6509, dist-4507 and access 3750 and 2960 switches into network.In CM-topology services, can we differentiate switches thru changes of device ICON colour instead of Green or other colours.

Resolved! LMS 3.1 Campus Manager - topology services

Sir, We are having core -6509, dist-4507 and access 3750 and 2960 switches into network. In CM-topology services, can we increase device icon as per core - dist- access switches

Can anyone give me a packet run through

Of what happens when you use the TFTP transport protocol to gather configurations from a device? Does SNMP RW have to be enabled?

Radius config not working

We're standing up a new network and I'm not having any luck getting Radius to work on my switches. It seems like the switch isn't even attempting to contact the Radius server, because when I attempt to ssh into the switch, then do a "show radius sta...

Resolved! LMS3.1 Software Distribution Failing

I'm trying to distribute/load IOS on our 4507 switches via the RME softwre distibutin (LMS3.1) but its FAILING.On the 4507 switches we are currently running 122-40.SG on some and 122-50.SG on others but RME fails on both platforms when trying to load...

end user report vlan data not correct

LMS 3.1 / CM 5.1.3We have a lot of Alcatel phones on wich a PC is connected. So there is a Data Vlan (234) and a Voice Vlan (853). In end user report all connections are shown in the data vlan.Anyway, The vlan port assignment data (operational tasks)...

LMS 3.1 on a T5220 server

Hello. Has anyone seen any performance issues when running LMS 3.1 on the T5220 servers. If so, can you tune Ciscoworks that is works better with the server.