01-04-2024 11:39 AM
Does anyone know where the ASA PCI ribbon cable can be purchased from?
This seems to be cause of the alarm. After checking there was a slight cut on ribbon cable not making the full connection, after removing and boot. Alarm came up. Per show controller pci details.
"1.) System is not fully operational - The PCI device with vendor ID: 1x1000 (LSI) device ID: 0x0a0 (Accelerator) could not be found in the system.
This is the ribbon cable that connects the accelerator board in front of the unit with the LSI PCI plane addon tray
Part# 35101NC00-01G-G Other part ID white sticker: 74-9917-01 BO Active Riser Cord
Alternate Style P/N: 35110AQ00-01G-G
01-04-2024 12:45 PM
2 options here
1) Put that back and open RMA with Cisco
2) If not under support look on Ebay and try to buy something cheap hoping that piece is working, and you will have more spare parts than before
01-09-2024 06:53 AM
Unfortunately unit is not under contract
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide