Hello,
I have a requirement to have 3 ASA or Firepower devices in my environment with their configurations sync'd. Is there any way to have 2 passive devices with 1 active? Any other recommendations to solve this issue?
Thx
t
Hello community.
Today I experienced the weirdest thing I've ever had. From the beginning I must say that I cannot past any Config as I am unable to acces in the ASA. yes. you read it right. After I upgraded my 5580-20 from 6.3.3 to 9.1.7 my Mgm...
Hi,I am trying to copy some files via tftp to our ASA for an upgrade.when I enter the command:copy tftp disk0:it fails because it always tries to use the outside interface.How can I change the default interface for tftp for the inside interface or sp...
I am trying to do integration between User Agent Cisco and firepower management Cisco, however, shows me the following error "Unable to connect to Firepower Management Center. I have read that it is possible that port 3306 tcp is closed, so make a te...
Hello Community,
QUick Question. Do anyone knows if there is any way to upload a config automatically in this platform so when it boots it gets the config from it instead of the stored one?
Regards,
Hello There.
We have an upcoming project with the below items:-
1) FirePOWER 4100 with NGFW & threat subscriptions (Two Qty.) - DC firewalls
2) FirePOWER 5525X with TAMC subscriptions (Two Qty.) - Internet firewalls
3) FirePOWER management center ...
Hi,We have site to site VPN between our Headoffice and our branch site. This branch site is monitored using Solarwinds. We have Cisco ASA's on both the ends. This site to site VPN disconnects say every 4-5 days. The connection is restored by issuing ...
Hi Community,
We have Cisco ASA 5516-X Firepower Threat Defense running on version 6.1.0. We are planning to upgrade the firmware to version 6.2.X. I believe on version 6.1.X the available and only way to upgrade the firmware is to use HTTP, TFTP o...
Hello,
I have two 2500 FMC's that shall be deployed in HA (active/standby) but I also have 4 ports fiber on the FMC and I need to do port-channel for two (20G) for management instead of eth0 (the default) .
I could not find a document for this, ple...
Hi,Does anybody know if FTD supports (maybe through FlexConfig) the following ASA equivalent for limit connection on a single IP ? set connection per-client-max XXXXXX (through class-map - MPF) CLI reference:set connection {[conn-max n ] [embryonic-c...
Hi, I was wondering whats the difference between Model and part numbers of an ASA firewall. Let us say ASA5580-20 (I understand this is the Model number), can anyone help me understand how to find the part number ? Thank you!
Hi,
i'am trying to install FirePower Services on a ASA 5515-x and a ASA 5555-x both failed with exact the same error.
Both running the same software version:
ASA Software Version 9.4(3)11
Device Manager Version 7.6(2)150
FirePower 6.1.0(330)
I'am tr...
Hello all,Was wondering if I can get some insight/help on this.Having some odd email issues.From most email servers, we receive email fine.But here recently we have been experiencing issues with Proof Point servers. Sometimes email being sent throug...
I have a question in regards to Bug ID: CSCve12652
As stated in the title, I have a ASA5585x with Firepower module and have had the above Bug ID brought to my attention. In going over the Bug ID I noticed that it does not state anywhere in the lis...
