Good day ,
Is there a way i can configure a time access rule on my firepower?
Like configuring a time-range for users policy to access the internet on a daily basis.
Thank you.
Hello,
Newbie here, no experience with Cisco ASA what-so-ever.
Can someone help show me via ASDM on a Cisco 5515 how to block OUTBOUND ports 80, 443 for a single host? All other hosts should have access.
Thanks
Dan
HI Team,
I need one help
We have ASA running with Multi-Mode and it is running with 2 context
I need to perform Drill
Please help me how to do Drill on this Context Firewall....
Greetings,
We currently have 2 ASA5515-SSD120-K9 firewalls operating in high availability mode. We are moving away from the CX Module provided PRSM solution due to the purchase of an independent filtering system.
Can the CX service card and SSDs be r...
We are currently looking to buy new ASA 5515-X boxes for our facilities.
Can you configure high availability between the 5515-X and a 5510, or do they have to be like devices?
I've googled and searched the support forum, but I haven't been able to fi...
I'm working on configuring ports for a SIP app through an ASA 5525x using 9.1. I can get all the related forwarding of individual ports complete but when I try to forward a range I get an error.
object network AvayaSIPInsideUDPPorts
host xx.xx.xx.xx...
Hi everyone,
I have seen one of our clients setup where they have cisco ASA with ssl anyconnect vpn.
on outside interface of vpn asa there is no acl.
Need to know how client traffic is coming from outside world to establish the vpn connections with...
Hello,
I have an existing production 5545 firewall -9.2 version. I need to convert this firewall into multi context mode.
I would like to know ,if i change to multi context what will happen to the existing configuration.What is the reliable procedur...
Hi Everyone,
I am seeing log messages below
%ASA-7-710005: UDP request discarded from 192.168.10.12/137 to video:192.168.10.255/137
Lot of messages are showing up.
Need to understand what does this message mean?
Regards
MAhesh
Hello,
I have a virtual sensor that I cannot apply changes to. I get an error of "Unable to connect to DB" in the task jobs viewer.
Does anyone have a solution on how to repair the database?
thanks,
Hi- ASA 5510 using ASDM 7.1(1) I have a new Exchange Edge server that I created an access rule for. I also have a rule I created some time ago to route SMTP/HTTP/HTTPS traffic to the main Exchange server. I've created the network object (external IP)...
Hi guys ,
I have installed the CSM 4.10 and looks like I'm getting an error : Rollback Configuration Failed.Please check failover configuration. Failed to Rollback due to improper failover configuration.
We're running Cisco ASA 5515X Failover setup...
I have a setup with two ISP. ISP1 is our primary for most outbound traffic. ISP2 is our secondary Internet connection configured for auto-failover if ISP1 fails.
We recently had an outage caused by an overzealous tech pulling a large amount of data ...
