Network Security

Okay, I had a long question written out, and that triggered something in my head and I fixed my issue.  But that leaves me with a question: why did it work?So I was having problems with accessing an internal camera from our wireless network, which ar...

I have used the wizard to create a Cisco AnyConnect Profile.  I have configured an IP Pool for my vpn ssl users on 10.11.1.0I can connect to the VPN, ping my IP assigned 10.11.1.2 but cannot access any networks or the internet.  I need all of the net...

Hi,We have a oly Polycom device working fine with our ASA5520.Recently we purchased a Polycom Group 500 and configured it as similar as the old Polycom device as possible.Now we can call out from Polycom Group 500 successfully.But for incoming call, ...

H all, one of our client had as issue related high utilization on ASA5585-X – which was solved after failover of standby device.Now client is facing error  during boot process Reading from flash...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!%ERROR: csco_config.l...

SA520W I set up an IPv4 rule from WAN to LAN and set "Log" to "Always".  Next I went to Administration -> Logging -> Logging Config and checked Accepted Packets and Dropped Packets for WAN to LAN.   Where can I view packet information that is logged ...

Hi all, Want to disable CBC mode cipher encryption, and enable CTR or GCM cipher mode encryption and disable MD5 and 96-bit MAC algorithmsASA version : 9.1.5(21)Any idea. Regards,Bala

Hello. I am labbing up Failover on 2 5505s and I have got it working but not the state full side of things. The option of using failover link seemsTo have disappeared. Ive wasted a day looking hence this post. Any help appreciated. 

Hi, I would like to ask how to translate/permit specific host on firewall.on 8.2ver I used nat (inside) 1 ipofhost and subneton 9.2 ver it notworking?do i need to create a net object network for the spefic address to be allow?please see the attached ...

Hello. on cisco ips how to put interface pair in promiscuous mode? when two interfaces are in promiscuous mode the traffic is not forwarding

We currently manage a multi-tenant environment where we provide each of our customers with a virtual firewall context. At the moment we are having to keep a spreadsheet per customer with all their firewall rules so that they are able to see what rule...

in sourcefire if sensor can't reach to Defence center. Are events are stored on sensor ? and i want to  know the limit the sensor can stored events ?