All,I just bought a brand new 2901 cisco router as well as 2 pvdm's and a VIC FXS card. I installed everything as supposed to but when I power the router on, the two pvdm status lights stay red as well as the two port lights on the FXS card. When I d...
I have an intermittent issue with web traffic using 443 through ASA 5515 where the issue is web site unavailable and other generic errors It has only happened since we installed new firewalls ASA 5515 and when I look at logs within ASDM I can see som...
I ran a vulnerability scan on a 2960 switch and some "ports" (I don't even know if this is the right way to call them) showed being open or that needed to be reviewed. I really need to know what they are and if I need to keep them or need to get rid ...
I was just wondering why the total throughput of a firewall may be less than the speed of the interfaces, i.e Firewall throughput : 1 Gbps Interfaces: 6 x 1000Base-T - RJ-45 Shouldn't the throughput be 6Gbps? 1gps for each port? I know I am missing ...
Hi, Anyone know which ISR G2 router model will support an Active/Active High Availability configuration?Is the ZbPF Active/Active configuration encouraged or is it better left to the ASA? I need to setup our Zone-based Policy Firewall (ZbPF, also kno...
HiI am migrating from Watchguard firewalls to ASA 5525x. I have a question around migrating NAT. The new firewalls are sitting alongside the existing watchguard firewalls connected to the same external switch. So am I right in thinking that I can con...
Hi folksCan ASA do "reverse NAT"? Vendors have different names for this but what I want to do is have my ASA translate incoming traffic from Internet to an internal IP but have the traffic appear to the internal server as coming from the internal int...
Greetings; I have a huge group of laptops that have the Cisco SecureMobility client (3.0) installed & configured by profile. Some of these same machines need to connect to an ASA 5512-X I've just set up. It has a standard "Cisco AnyConnect" image i...
I have a very basic configuration...
ASA 5505 running 9.2(3)
Firewall mode: Routed
Inside network is 192.168.253.0/24 (ASA is 192.168.253.1)
Outside network is 1.1.1.32/29 (ASA is 1.1.1.34)
Web server is 192.168.253.70 and I want that NAT'd to 1.1...
Hi there!We have two ASA 5505 appliances, running software version 9.2.2(4), with Security Plus licenses. We want to fix their vulnerabilities (CSCur23709, CSCug51375, and CSCus08101), related to POODLE and POODLE BITES bugs.These appliances are not...
Hi guys. I have new dmz zone for wireless guest access . Guest's can connect to our vpn by ip but can not by name . On our DNS (windows server) server we have name-to-ip for access from external and from internal access but I am not sure we can ad...
