Network Security

Engage with peers and experts on network security topics such as FTD, FMC, FDM, CDO and ASA.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Hi,      I have an ASA 5540 in main office and a remote office recently opened up, has come up with a broadband firewall which supports IPSec. but only with a single subnet.Meaning in ipsec configuration the other end device shows capacity to add sin...

I am seeing a lot on my INSIDE interface, from multiple IP's and all pointing to port 137, Could this be a DNS lookup issue? Frame drop:  Punt rate limit exceeded (punt-rate-limit)                               22096  Invalid encapsulation (invalid-e...

I have a Cisco ASA 5505 Firewall with version 8.0(3).  I am trying to allow an external network SSH access into an internal host.I am seriously struggling with this seemingly easy scenario. For protection I will use fake IP's - but here is what I wan...

jgarcia44 by Level 1
  • 432 Views
  • 5 replies
  • 0 Helpful votes

Hi all,I'm looking for some clarification in reference to trunking on an ASA.I have an ASA 5512-X with two 3750-X's connected to the inside and outside interfaces and I need to trunk between them. I can set up sub-interfaces and configure the correct...

petenixon by Level 3
  • 336 Views
  • 3 replies
  • 0 Helpful votes

Hello friends,Since I manage many ASA devices at the company I work where, I would like to get a tool to perform periodic and automatic configuration backups. I am just interested about the ASA configuration, don´t care about other modules. Does anyb...

I have recently inherited a pair of ASA 5510's at 2 locations that I need to upgrade to 5515-X's (4 total). Is there a way to migrate these two quickly and easily or will I have to do it all by hand and enter in everything? I can hope that there is a...

JonRM1970 by Level 1
  • 175 Views
  • 1 replies
  • 0 Helpful votes

Does anyone know if you can configure a hairpin NAT on a Cisco SA540? I can configure NAT for outside users to connect to my mail server. And my internal secured network users connect to the mail server via the internal IP address. But I have users o...

Hello all,we have a Little Problem with our Public Subnets on our main Cisco ASA 5510.Following Situation: We get 2 different Subnets provided on the same Ethernet Switch from our Provider.Just like:- Subnet 1       11.11.11.0/28- Subnet 2        22....

Review Cisco Networking products for a $25 gift card