Network Security

If Mgmt1/1 interface is on another subnet, how can I put a different gw for that?(or something like a vrf)or it uses the default gw that I already setup on FX-OS?!lolbut what about 5555x that doesn't have FX-OS? Thanks,

I have China geo-blocked, both as a source and destination (separate rules of course), yet still see Intrusion Event blocks for traffic originating in China.  Is this working as designed?  The intrusion event based block is based on a malware signatu...

Hello all, I have 2 ASA connected with a similar configuration than the attached file. If I need to connect, let´s say, 10 more ASAs between them (full mesh). What is the easiest way to do it? I have to create new tunnel-group and a interface for eac...

I am trying to setup an AnyConnect SSL VPN connection and receiving an IPsec error?  The error I am getting is:"The IPsec VPN was terminated due to an authentication failure or timeout"The Group policy that I am using has only SSL AnyConnect checked ...

I am simply trying to remove the last light (highlighted in bold), but can't figure out how to do it... access-list outside_1_cryptomap extended permit ip object-group Dupont object-group MECaccess-list inside_access_in extended permit ip object-grou...

Hello, I know that QoS is supported for routed interfaces on Firepower Threat Defense devices only.There is a way or workaround to limit de bandwith use of Youtube, Facebook, for example, in a rule in the FMC administering the SFR module of ASA with ...

Hello, Can anyone assist me with see why I only get half the Network Speed on my ASA. I have 1GIG Internet and I can only get 500 Mbps or less when using the ASA5510. Is this a license issue or something? I changed the speed to AUTO/AUTO or FULL/FULL...

Hello Guys @balaji.bandi @Marius Gunnerud  @Rob Ingram  @Aref Alsouqi   I have a internal lan interface: 172.16.10.1/24 and it is gateway.  172.16.10.40 is another router connected internal for specific external routes . so any traffic which goes fro...

Hi everyone,I’m having a strange issue with a new FirePower Threat defense installation My Company has an MPLS that connect all the branch offices and an Internet connection for Internet Navigation The FTD is configured in routed mode just to protect...