Network Security

All,   I need some help from the cisco guru's again. I have as ASA firewall setup with a static IP address. That is working almost flawlessly. Except for the domain of all people my employer. Any help on resolving this issue is appreciated. Here is m...

Hi Guys, I am trying to add syslog servers in logging of a specific access policy rule. I have created an new syslog server for the same. I want to add multiple syslog servers for the same. Please let know if this is a limitation from FMC. since i am...

Hi  I have a migration project from Fortigate firewall to Cisco FTD, i want to know if there are  any converter softwar to convert the configuration  from Fortigate to Cisco FTD      Best Regards  A.kermia 

Hi Everyone, It would be a great help to me, if someone can address this problem Situation: Trying to copy the file from SFTP server to ASA firewall 5545 disk0:  Problem: Getting the error messgae as permission denied Procedure that I followed: 1. co...

Just wonder if this is another firmware limitation...   I need to specify the management interface of FTD as the source interface to reach AAA server. I think by default FTD is using the routing table to decide which interface to try to reach the AAA...

Hello, we are looking into using the FTDv on the edge of our Azure network. Is the IPS feature-set managed by Cisco? Will the definitions be automatically updated? If not, would it be better to use an ASAv and then purchase a separate virtual applian...

Hi ExpertsI have the below policy-Map in my firewall,according to this policy map please how can i block teamvirewer via asa 5520, i don't want the outside users to connect using teamviewer to their servers which is already ready up for teamviewer ac...

Dear all, I have a 5506 running ASA v9.8(1). I have tried getting my ASA to route traffic between subnets, i got it working for 10 minutes but after some changes i have broken something.   My interfaces are below, configured with security-levels.   !...

I know in Azure we can create a HA on AWS, what about in AWS, can we configure HA, and can you direct me to a documentation to do so. Thank you.

Hello Cisco Community,   Perhaps I am in the wrong forum. However, I wanted to ask roughly, is it acceptable to mount a FPR-2110 into an Ortronics 4 post rack using rack-mount brackets alone?   I am thinking that it will be top-heavy and lean down in...

I tried to find alot for the answer of this question online, but nothing has helped much.   I am aware that the SFR module shares the MGMT interface with the ASA and its only used for Management level communication to the FMC. But what interface on t...

Hi,   We have firmware 1.0.10 in our FP4140´s, So we would like to upgrade this firmware to 1.0.16. In order to upgrade FXOS and FTD version after this. So, is there any upgrade path to upgrade form 1.0.10 to 1.0.16?? any upgrade instructions. i cant...