01-09-2018 05:30 PM
Bellow you'll see a display of ASA5510 firewall running config. I'm unable to ping inside host computers from ASA5510 CLI. However I can access the internet from a computer connected to the firewall. Please take a look at the running config bellow. I will greatly appreciate your response. Thanks in advance.
ASA5510# show run
: Saved
:
ASA Version 8.2(1)
!
hostname ASA5510
enable password Ipf7KGrIa/7r74QM encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
speed 100
duplex full
nameif outside
security-level 0
ip address dhcp setroute
!
interface Ethernet0/1
speed 100
duplex full
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
!
ftp mode passive
dns domain-lookup inside
dns server-group DefaultDNS
name-server 8.8.8.8
name-server 8.8.4.4
same-security-traffic permit intra-interface
object-group service RDP tcp
port-object eq 3389
access-list NAT-ACLs extended permit ip 192.168.1.0 255.255.255.0 any
access-list inbound extended permit tcp any interface outside eq smtp
access-list outside1_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
pager lines 1000
mtu outside 1500
mtu inside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 access-list NAT-ACLs
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface smtp 192.168.1.13 smtp netmask 255.255.255.255
access-group outside_access_in in interface outside
access-group NAT-ACLs in interface inside
route outside 0.0.0.0 0.0.0.0 192.168.4.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd dns 8.8.4.4
!
dhcpd address 192.168.1.2-192.168.1.253 inside
dhcpd enable inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password sjkhOtp6ZaBJG/uI encrypted privilege 15
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:0d5ac184a9b777ca0119e5a3b1677ed7
: end
ASA5510#
02-20-2018 11:54 AM
You may need the command "management-access inside" command.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide