06-30-2015 03:08 PM - edited 03-11-2019 11:12 PM
Hi
I have an asa5525 running SW 9.3
I have a scenario where an internal user needs to access an internally hosted website. So ive read to achieve this I need to configure NAT Loopback so that the request for the webpage gets resolved by the ASA and then comes back into the firewall.
Not sure how I can achieve this or if there is is a feature on the new asa's for this. I am using ASDM.
Thanks
Solved! Go to Solution.
06-30-2015 06:11 PM
Hi,
I think you can do the same using the ASDM as well:-
2.2.2.2 :- Natted IP of the Webserver
10.1.10:- Real Ip of Webserver
object network Webserver
host 10.1.1.10
nat (inside,inside) static 2.2.2.2
Thanks and Regards,
Vibhor Amrodia
06-30-2015 06:11 PM
Hi,
I think you can do the same using the ASDM as well:-
2.2.2.2 :- Natted IP of the Webserver
10.1.10:- Real Ip of Webserver
object network Webserver
host 10.1.1.10
nat (inside,inside) static 2.2.2.2
Thanks and Regards,
Vibhor Amrodia
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide