Solved: Remove SIP trunk

Mohd Khairul Nizam · ‎08-29-2017

one of our partner notify us that they are going to decomission one of their server.

I want to know, what should i do on our side?

Would be just remove the no. 2 server?

What others configuration will involve? Router ?

Jaime Valencia · ‎08-30-2017

That will depend on what elements are involved in your call routing, but that is something you should know.

At least from the CUCM side, yes, all you need to do is to remove the other server from the SIP trunk.

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎08-30-2017

That will depend on what elements are involved in your call routing, but that is something you should know.

At least from the CUCM side, yes, all you need to do is to remove the other server from the SIP trunk.

HTH

java

if this helps, please rate

Mohd Khairul Nizam · ‎09-04-2017

Thanks,

But acctually i dont know really.

I just join and this is my 1st time doing Cisco Voice.

Jaime Valencia · ‎09-05-2017

Then either you try to find out a senior engineer who knows how this is configured, or you try to figure out the whole configuration by going to each device that is used in the SIP trunk to find out who that is, and if it needs to be adjusted as well.

HTH

java

if this helps, please rate

Mohd Khairul Nizam · ‎09-06-2017

Yup, i have checked.

Remove the remote call manager, save and reset it.