Production Site to DR site Network Design

[piusnolih]

I have a Prod network with the following Switches as Core: Cisco9336C-FX2 36Port 40/100G port density.

Our Link is only 100Mbps and can go up to 1G and we intend to install a Similar Model Switch at DR for Active/Active Replication.

We intend to achieve Active-Passive in phase 1 and Active/Active in phase2.

Are we able to carryout a VPC or using 2 MPLS from providers using qinq or vxlan?

Also the Core switches only have 40G/100G and provide can only go up to 1G, will that be possible as well?

Just need guindance on the design and configuration steps?

[balaji.bandi]

Its all depends on what already configured and what configuration major you can change.

You can use different methods - if you looking to extended the VLAN suggest to use VXLAN (check the guide lines and documentation for the requirement).

Other Option you can also use OTV.

check some deployment methods :

https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/4-0/EMC/dciEmc/EMC_2.html