Currently, the SW is a LAN LITE model and only supports single host modeUsing single-host mode,If it is connected as shown below SW -> (single-host mode setting, mab, dot1x authentication setting) | |IP Phone -> (mab authentication, specific vl...
Forum Posts
VSOM server version: 7.5.0-901 Media server version: 7.5.0-902d SASD version: 7.5.26.8840 I'm having some trouble and don't know where to look. I have camera retention set for 30 days on all my cameras. Cameras are spread across various media ser...
Resolved! Vivotek Cameras in VSOM
I'm pretty sure I know the answer to this, just wanted to make sure. From what I can tell, adding Vivotek Cameras appears to require 7.9.0. I am at 7.8.0, so I wanted to be sure there wasn't a driverpack that could be added to allow adding them wit...
When adding media servers to vsom the servers are not coming back green, they are orange with this error message. I have manually checked the media servers and everything looks fine. Any suggestions? Pending software Upload - Media server(s)/VSOM...
Is it possible to move camera recordings from one directory to another on the VSMs? For example, we have (11) 2TB virtual hard drives which correspond to /media1 to /media11. We currently 1 or 2 cameras (about 10-14 cameras total) recording to each...
Resolved! Import certificates
Hello all, I generated the CSR from our Cisco Prime 3.1 server and set it off to get a 3rd party cert. I got it back and uploaded it according to the documentation. ncs key importcacert "alias" "cert filename" repository "repositoryname" I also tried...
I have a VSOM running 7.9. I am adding a few new servers. Six of the eight new servers I was able to add just fine. On the other two I add them and then monitor the job and it has added 5 steps. On the others it added 9 I believe. I am attaching the ...
Resolved! Collision in Identities
"Operation failed: These device(s) {name of one camera} have a collision in identities. If one of the colliding devices is a camera, then please check the pending devices as well."This is the text of an error message received when installing a came...
Hey Everyone, Anyone had a need to only view one camera live? Perhaps from a fixed location as above an entry etc. Ever found a lightweight PC with graphics capabilities to pull it off. The specs for a viewing station are significant compared that ...
Hi,I have a demo setup consisting of CPAM 1.3.2(0.3.5) and an Access Gateway running the same version.When I open the Windows Client I can see the gateway under the hardware tree. However, quite ofter I receive an error in the alarms view as follows:...
Hi People, Is there any tool available for converting configuration from Draytek firewall to cisco ASA 5516x, Please advise Many thanks AM
I am looking for best practice DMZ and Internet provider side network architecture. could someone provide me direction to the best practice guide please. I couldn't find it.
is there a way to add a camera with a custom port number?
I know this has been asked previously, but I've not yet seen any answers... When implementing mac based port security via sticky macs or static macs on an interface how can we allow our Fluke and Netscout devices to test ports on our network? We c...
Hi i have VSOM 7.6 has issue with data base , so i an try to restart db but no resolve so i am recreate the database , then after my server is crushed , /usr/BWhttpd/bin/init_vsom_mysql restart /usr/BWhttpd/vsom_be/db/database_create.sh i am lo...
