2811 EoMPLS

[vedrank72]

Hello,

has anybody configured or seen EoMPLS on Cisco 2811 routers?

I have 2811 with IOS C2800NM-SPSERVICESK9-M Ver 12.4(17b), configured as PE router,

but It only permits me l2tpv3 encapsulation:

interface FastEthernet0/1.3000
encapsulation dot1Q 3000

router(config-subif)#xconnect 10.10.10.10 3000 encapsulation ?
  l2tpv3  Use L2TPv3 encapsulation

Is it due to a IOS version or EoMPLS can't be configured on 2811 Series?

Regards,

A.

[Robert Taylor · Accepted solution]

EoMPLS is supported on 2800 series ISRs.

Support starts at 12.4(11)T code, so you will need to upgrade to get these features on the 2800.

[vedrank72]

Thank you very much

[vedrank72]

I can't open niether link, did you post

correct ones?

regards,

Vedran

[Robert Taylor]

Sorry ... my mistake, those were internal.  Normally I check that sort of thing.

I dont see a similar document posted externally.  However, the details are the same (need 12.4(11)T or later, and SP services or Enterprise services feature set or better).