Routing

Hello, I have 3 open slots for this SPA, I insert 2 and they work, when I insert the third one it doesn't come up. Is there something I am supposed to do for the third one to lite up?  

Hi   I have the present scenario and would like to ask for any suggestions / best practises   There is two buildings and 1 ISP Circuit/ routers in each building. I would like to do BGP multihoming - I want building A to be primary and building B to b...

HI All, Please find the scenario below Two router (Router A and Router B) with one ISP link terminated on each router . EBGP is established with the ISP router and IBGP between Router A and Router B As of now all outgoing trafffic orginated from loca...

Hi, we are in the middle of cisco 3650-24TD-S switch installation. we have 2 qty C3650 switches (in a stack) to connect check point firewall and VMWare Exsi 6.5 host (fujitsu cx 400). vmware host will connect to both switches (example port 1 of serve...

Hi Dears.   I deployed Cisco WAAS in my network, and use WCCP v2 to redirect traffic to WAE. but when I enable policy in WAAS the whole connectivity in my network goes down. how can I Tshoot this problem?   thank you best regards

Hi, hope some one can help!   We have started facing intermittent internet issues recently on our 2Gbps dedicated Internet link. All the traffic is currently PAT to a range of 5 IPs from a ASA cluster (2 physical firewalls) with contexts. What we obs...

Hello,   We have an ASR9K device towards our network EDGE. And we've two ISPs. After implementing bundle-ether (LAG-LACP) in one of ISP links the ARP process stopped to work at another one.   We debuged arp process and saw this:     LC/0/0/CPU0:Jun 2...

I have 4 locations that are utilizing gateway to gateway connections. 3 locations have the Cisco RV325 Wan VPN Routers and one has an ASA. Under the VPN Summary tab the 3 VPN connections were all connected at one time and recently the status went to ...

Hello Everyone,     I'm trying to understand DMVPN over MPLS network. I have attached a topology where I want to use DMVPN as a backup when MPLS goes down. What would I need to implement on HQ and Branch routers so that they would connect using DMVPN...

Hi all,I'm looking for some input/ideas about the following design:Core router:- Static default route pointing to the internet firewall  (e.g. ip route 0.0.0.0 0.0.0.0 10.1.1.1).- OSPF with several branch routers.- PBR on the interface connected to t...

Dear sir   Always the port  Gi1/0/6 is going down , after restarting the switch it is working for small period and become down  , it connected to PC ,   Please check the error  logs     INK-3-UPDOWN: Interface GigabitEthernet1/0/6, changed state to u...

Hi there, Thanks for reading. I have users who are complaining about connection speeds using Anyconnect.  Speedtest without AC is 90-100Mbps as expected.  When they test while VPN connected, they get 1.9Mbps.   The AC Dart log AC Event view shows thi...