SSH and Console does not work in ASR9010, IOS-XR 5.3.2 After my ssh connection : [SSH] Server Version Cisco-2.0[SSH] Logged in (password) --isstuck here-- After my ssh connection(debug) : [SSH] debug: Connecting to xxxx [xxx1] port 22.[SSH...
Forum Posts
In the same PIM domain, some router has PIM directional enabled and some routers are not. What will be the final mode the Multicast protocol will be using build trees with the same RP and for the Multicast to work properly?
Hello, I have 2 N9K's which are peer-linked together in data center 1 and the same thing in data center 2 and we use VPC to connect up downstream switches. We are currently looking to connect these 2 far apart data centers together, directly from N...
I am planning a backup connection to a main site if our primary link goes down using a site to site vpn. This is what the connectivity looks like: ##Regular Connectivity, and Internet Traffic flows Backup_Internet--ASA--CoreA--Router-->>Private_W...
Greeting I am trying to build DMVPN MPLS ( it will be L2VPN MPLS ) i dont know if it will make a difference but im using L2 switch from GNS3 it should be the same i guess since the isp im using will not provide L3 or VRF's anyway, my plan to do 2 m...
Hello everyone, I have a router with 2 WAN links from two different ISPs terminated on Serial & Gig interfaces. Both the interfaces are in different network. Traffic on both the links are handled by QoS. BGP is the prot...
Hello, Why this command isn't avalaible on ISR 4K - IOS-XE vs IOS ? option 60 hex xxxxxxx I'am using this configuration on IOS : ip dhcp pool DHCP-TEST-ALL network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 class TEST1 address r...
Hi All, Some of our MacBook clients are disconnecting from wireless access point automatically, we are using 5500 wlc and load balancing is disable on ssid. Kindly assist .
Hi all, I have two 3850-24XS as a stacked distribution switch running 16.3.6 with MPLS enabled. For awhile now I've been getting a lot of traceback errors in the log and google does not seem to be helping me decipher them. Here are the two primar...
I have spent a good deal of time with ASAv (9.7) in GNS3 experimenting with VTI tunnels between ASA's, trying to get routing to be exchanged gracefully, and could use some sanity checking. There are two issues generally. The first is that the docume...
I have a branch office with a Cisco 881, using LAN address 10.1.1.0/24, and a Cradlepoint IBR650B router for Verizon using passthrough to the router, so it's effectively a modem. The office needs more data in a billing month, so a 2nd SIM has been or...
Hi All, Need your support & solution. We have two 4451 cisco router & we have configured OSFP & also licenses for IPSec. I want know that "how can I check IPSec is configured or not" We want to use IPSec for only secure our router communicati...
Hi, Just want to verify. For a dhcp scope, you can define max 8 dns server entries. Im wondering how will it be assigned to a host, if a host (i.e. windows users) can only use 2 dns servers at a time. Thanks in advance
Hi Dear friend I wnat config extended ACL For example permit yahoo.com yahoo.com have many IPS I want router ASR relove domain to all ips i test with this permit ip any yahoo.com it resolve to one ip top address of site yahoo than yahoo site hav...
Anyone have experience setting up the Symantec WSS coming from a 5500 ASA? The auth connector can't go through the tunnel like the regular traffic so how would I set that up so the AD servers can get to the cloud?
